Lowering module for Audi A6 C6 4F with app control

Are you looking for an easy way to lower your Audi despite having air suspension?

Your Audi Adaptive Air Suspension System is too spongy for you and you would like to improve the appearance of your vehicle without much effort?

We offer you the possibility to bring your air suspension to the depth you want without much effort!

Our Active Suspension Control unit is installed within a few moments and immediately adjusts the air suspension to your requirements.

Some additional features are available with the free app:

Features:

• series functionalities
  You can still operate your air suspension via the Audi MMI; it is simply lowered or raised by the desired amount.
• Audi Drive Select
  You can assign a separate lowering or raising setting to each Drive Select mode.
• series height
  Using the app, you can set the cut-off speed at which your vehicle returns to the standard height or maintains the set lowering.
• Show Mode
  If required, the air suspension can be lowered to a preset value using the show mode.
• correction of misalignment
  Have you ever noticed that the chassis is slightly tilted? This is usually only noticeable when it is really low. In this case, it was not calibrated perfectly at the factory. We have also created a function in the app for this. It can compensate for the tilt.

Plug&Play:
Our Active Suspension Control is connected absolutely plug & play, no complicated plugging or unplugging on the wiring harness!

Available for:

All Audi A6, S6 and RS6 C6 4F models

Scope of delivery:

• 1x Active Suspension Control BLE control unit
• Cable set / adapter (depending on model and engine)
• Vent kit for show mode.
• installation instructions

A notice:

Only suitable for vehicles with standard air suspension

We recommend that installation be carried out by a specialist workshop.

The system is delivered without a TÜV certificate and is therefore not approved under the German Road Traffic Act.

*model-dependent deviations possible